SB ACOUSTICS SB17MFC35-4 6” 4ohm Ferrite MFC Midwoofer Loudspeaker
£54.89
- Vented cast aluminum chassis for optimum strength and low compression
- Mineral filled PP-cone made in-house
- Soft low damping rubber surround for improved transient response
- Non-conducting fibre glass voice coil former for minimum damping
- Extended copper sleeve on pole piece for low inductance and low distortion
- CCAW voice coil for reduced moving mass
- Long life silver lead wires
- Vented pole piece for reduced compression
In stock
SB ACOUSTICS SB17MFC35-4 6” 4ohm Ferrite MFC Midwoofer Loudspeaker
- Vented cast aluminum chassis for optimum strength and low compression
- Mineral filled PP-cone made in-house
- Soft low damping rubber surround for improved transient response
- Non-conducting fibre glass voice coil former for minimum damping
- Extended copper sleeve on pole piece for low inductance and low distortion
- CCAW voice coil for reduced moving mass
- Long life silver lead wires
- Vented pole piece for reduced compression
SB ACOUSTICS SB17MFC35-4 Specifications
- Nominal Impedance 4 Ω
- DC resistance, Re 3.1 Ω
- Voice coil inductance, Le 0.13 mH
- Effective piston area, Sd 118 cm2
- Voice coil diameter 35.5 mm
- Voice coil height 16 mm
- Air gap height 5 mm
- Linear coil travel (p-p) 11 mm
- Magnetic flux density 1.0 T
- Magnet weight 0.54 kg
- Net weight 1.55 kg
- Free air resonance, Fs 30 Hz
- Sensitivity (2.83 V / 1 m) 90 dB
- Mechanical Q-factor, Qms 5.2
- Electrical Q-factor, Qes 0.30
- Total Q-factor, Qts 0.28
- Moving mass incl. air, Mms 12.3 g
- Force factor, Bl 4.9 Tm
- Equivalent volume, VAS 45 liters
- Compliance, Cms 2.29 mm/N
- Mechanical loss, Rms 0.45 kg/s
- Rated power handling* 60 W
| Weight | 1 kg |
|---|---|
| Brand | SB ACOUSTICS |
| Size | 6'' |
| Magnet type | Ferrite |
Be the first to review “SB ACOUSTICS SB17MFC35-4 6” 4ohm Ferrite MFC Midwoofer Loudspeaker”
You must be logged in to post a review.
Related products
Reviews
There are no reviews yet.